Payment & Shipping Terms:
|Model:||ChengGong DaNiu CGZN-110 Automatic Wall Plastering System||Poles Materials:||304 Stainless Steel|
|Machine Weight:||136kg||Plastering Technology:||High Frenquency Vibration System|
|Max Plastering Speed:||4.3 Sqm/min||Plastering Thickness:||0.2-3.5cm|
|Plastering Width:||1100mm||Working Efficiency:||700-800 Sqm Per 10 Hour|
|Positioning Style:||Infrared Ray Position Style||Power:||1.10kw|
|Hopper Capacity:||40 Litres|
ChengGong CGZN-110 automatic wall plastering machine is the first model of the CGZN 110 series. The launch of the CGZN-110 automatic wall plastering machine is always be regarded as the milestones in the research history of the plastering machine. Before this model, all the palstering machine on the market are using the steel wire rope to traction machine,from CGZN-110, all the plastering models begin to adopt the gear&rack lifting mode, which is more stable driving, higher reliable, and also a longer life.
Combined with the infrared positioning device to help locating the machine,which repalce the manpower to take the complicated traditional ways with a low accuracy and time consuming.
Reseach & Design is a long journey, while technology shall always be put first for a company. ChengGongReseach & design working team will also work hard and keeping aming at offering the best performance machine with easier operation and high productivity to complete release the manpower step by step.
Core technology highlight.
1.Industrial intelligent PLC controling system
The Industrial intelligent PLC controlling system is an intelligent programmable logic controller, which simplify the previous complex alternating current receivers, as an intelligent modal components. It can perfectly control the whole operation procedure, greatly reduce the failure rate of the electric system.
2. ChengGong unique Strong mechanical Design.
The standing main portal frame adopts the specially formulated magnalium, water proof and rust proof, the main portal frame is as wide as 21cm to ensure the perfect combination of the long durable hardness and toughness.
3. The ChengGong specially formulated plaster board.
The specially formulated plaster board, which ensure the rendering surface quality, flattening, and smooth, will not easy to get transformation under intense squeezing or the complex construction site environments.
Perfectly combine the hardness and the toughness.
4. Remote Control Panel
The RCP is a software module which allows you to control the plastering machine from a distance of the machine as a replacement of controlling the machine on the panel.
1.Two plaster board,four times repeating plastering,and stronger adhesive strength.
2.The infrared automatic positioning device,high accuracy and working efficiency.
3.Two-person operation the machine to finish all the work to save labor.
4.Limit lever poles :only need 10 seconds to deal with the under surface of the cross-grinder with limit lever poles.
5.Flexible top board:plastering of the beam position no need to dismounting flexible top board to increase the working efficienty.
6.The extender hopper capacity is increased 40%,no need to feed mortar when in the middle of plastering to increase the working efficiency.
7.The low-voltage start up avoid voltage instalility burning mortor.
8.Spring connecting style,no need for maintenance and avoid loose.
9.Four protection:air gas protection,torsion protection,overload protection and drive protction.
10.Independent research and development of inclined gas spring bearing , hydraulic plunger locking grip the floor, fixed the machine between ground and the top , to ensure the stability of the machine, thus ensuring the wall plastering is smooth.